Single swing arm contactless car washing machine
Product advantages
1. Unique design, excellent performance
Intelligent control: equipped with PLC fully automatic computer control system, stable and reliable operation, support one-button start and stop and intelligent fault detection.
Single swing arm structure: 360° rotation design, covering the front and rear of the car body, hood and tail and other dead corners, cleaning more thoroughly.
Space optimization: compact design (installation size only needs 8.18 length × 3.8 width × 3.65 height), suitable for small and medium-sized sites.
High-end washing and care mode: combined with foam, wipe-free liquid, water wax triple media, cleaning and coating polishing, protect the car paint.
2. Multifunctional integration
Full process cleaning: 70-120KP high-pressure water pre-washing → foam covering → wipe-free liquid to decompose stains → water wax coating → high-speed air drying.
Intelligent interaction: equipped with LED display and voice prompts, real-time display of car washing progress and operation instructions, improve user experience.
3. Excellent cleaning effect
High-pressure water jet system: Highly efficient in removing stubborn attachments such as mud, oil, etc., with a cleaning rate of more than 95%.
Water wax coating + air drying: After cleaning, a protective film is formed to enhance the anti-fouling ability of the paint, and the car body is as bright as new.
Four sets of fixed blowing systems: Optimize the air duct design, quickly dry the body moisture, and reduce water stains.
Application fields
Commercial car wash scenarios: efficient car wash services in car beauty shops, gas stations, parking lots, 4S shops and other places.
High-end vehicle services: suitable for luxury cars, business cars and other models with high requirements for paint protection.
Unattended scenarios: support 24-hour self-service car wash mode to reduce labor costs.
Environmental protection and energy-saving scenarios: low water and power consumption design (single vehicle consumes 251L of water and 0.95KWh of electricity), in line with green operation needs.
Parameter
|
category |
Parameter Details |
| Device size | Length 8.18m × Width 3.75m × Height 3.61m |
| Installation range | Length 8.18m × Width 3.8m × Height 3.65m |
| Car wash size | Maximum supported length 5.3m × width 2.5m × height 2.05m |
| Cleaning efficiency | General washing: 3 minutes/car, fine washing: 5 minutes/car |
| Power Requirements | Three-phase 380V 50Hz |
| Energy consumption data | Water consumption: 251L/vehicle, power consumption: 0.95KWh/vehicle, foam: 35-60mL/vehicle, wipe-free liquid: 30-50mL/vehicle, water wax: 30-40mL/vehicle |
| Core Components | PLC control system, high-pressure water jet system, four sets of fixed air drying system, hot-dip galvanized frame |
With intelligent control, efficient cleaning capabilities and low operating costs, this car washing machine has become an ideal solution for the modern car washing industry. Its non-contact design avoids scratching the car paint, and its water wax coating and air drying technology improve the appearance quality of the vehicle. It is suitable for diversified commercial scenarios and helps users achieve efficient, environmentally friendly and high-profit car washing services.
| main function | Instruction |
| Operation mode, four 90° turns | The robotic arm walks 360° around the body, and the angle of the four corners is 90°, which is closer to the vehicle and shortens the cleaning distance. |
| Flush chassis and hubs system | Equipped with the function of cleaning the chassis and wheel hub, the nozzle pressure can reach 80-90 kg. |
| Automatic chemical mixing system | Automatically match the ratio of car wash foam |
| High pressure flushing (standard/strong) | The water pressure of the water pump nozzle can reach 100 kg, and the robot arms of all equipment wash the body at a constant speed and pressure Two modes (standard/power) can be selected.. |
| Water wax coating | The hydrophobicity of water wax helps to speed up the drying time of the car and can add brightness to the car body. |
| Built-in compressed air drying system (all-plastic fan) | The built-in all-plastic fan works with four 5.5-kilowatt motors. |
| Intelligent 3D detection system | Intelligently detect the three-dimensional size of the car, Intelligently detect the three-dimensional size of the vehicle and clean it according to the size of the vehicle. |
| Intelligent electronic collision avoidance | When the robotic arm touches any faulty object during the rotation, the PLC will immediately stop the equipment operation to protect the equipment from scratching the car body or other objects to avoid loss. |
| Parking guidance system | Guide the vehicle owner to park the vehicle at a designated location, instead of the traditional manual guidance of the car wash, and guide the vehicle to park through the prompt light to avoid danger. |
| Security alarm system | When the equipment fails, the lights and sounds will prompt the user at the same time, and the equipment will stop running. |
| Remote control | Through the Internet technology, the remote control of the car washing machine is truly realized, including remote start, close, reset, diagnosis, upgrade, operation, remote liquid level monitoring and other operations. |
| Standby mode | When the device is not used for a long time, the device will automatically enter the standby state, the host control system will selectively shut down some components with higher energy consumption, and wait for the device to re-enter the working state, the host control system will automatically complete the wake-up and standby service. It can reduce the energy consumption of the equipment in idle state by 85%. |
| Fault self-check | When the equipment fails, the efficient PLC control system will preliminarily determine the location and possibility of the failure through the detection of various sensors and parts, which is convenient for simple and quick maintenance. |
| leakage protection | It is used to protect the staff who may be shocked in the event of a leakage fault. It also has overload and short-circuit protection functions. It can be used to protect the overload and short-circuit of the circuit and the motor. It can also be used as an infrequent switching of the circuit under normal conditions. |
| A free upgrade | The program version is free to upgrade for life, so that your car washing machine will never be outdated. |
| Strengthen the front and rear washing | Using German Pinfl high-pressure industrial-grade water pump, international quality, to ensure 100kg/cm², real waterjet high-pressure washing, sweeping stubborn stains. |
| Water and electricity separation water foam separation | Lead the strong and weak currents from the crane to the distribution box in the equipment room. Separation of water and electricity is the basic prerequisite to ensure the long-term trouble-free operation of a car washing machine. |
| Foam separation | The water path is completely separated from the foam liquid path, and the water path is taken separately, which can really increase the waterjet pressure to 90-100 kg. The foam is sprayed by a separate arm, which greatly reduces the waste of car wash liquid. |
| Direct drive system | Although the new direct drive technology has increased a lot of costs, it has greatly improved the energy saving, safety and stability of the equipment. |
| Bubble waterfall(Add this feature for another $550) | Large colored foam is sprayed to form a waterfall, achieving high cleaning effect |
| Hot dip galvanized frame double anticorrosive | The overall hot-dip galvanized frame is anti-corrosive and wear-resistant for up to 30 years, and can be simply adjusted according to the installation height. |
| L arm can move left and right, automatic measurement of vehicle width | The robotic arm liquefies various car washes into mist or foam, and sprays them evenly at 360 degrees to cover all parts of the car body to give full play to its decontamination effect. |
| Clean the rearview mirror | The spray head sprays liquid at a 45° angle, easily flushing the rearview mirror and other angular positions. |
| Frequency conversion energy saving system | Incorporating the most advanced frequency conversion technology, all high-power and high-power motors are driven by frequency conversion to reduce noise, reduce noise, and extend equipment life. |
| Oil free (reducer , bearing | Equipped with NSK bearings originating in Japan as standard, which is oil-free and fully sealed, and is maintenance-free for life. |
